How to install the electric shutter door for steel warehouse?

The installation steps for electric rolling shutter doors in steel structure warehouses are as follows:

1. Preparation before installation

Measure the size of the door opening

Accurately measure the height and width of the steel structure warehouse door opening to ensure accurate dimensions. At the same time, measure the depth of the door opening to determine the installation position of the rolling shutter door scroll.

Check whether the walls and floors around the door opening are flat. If there are any unevenness, they need to be treated to ensure the sealing and stability of the roller shutter door after installation.

Prepare installation tools and materials

Installation tools: screwdriver, wrench, drill, level, tape measure, welding machine, etc.

Installation materials: electric rolling shutter door, guide rail, scroll, motor, controller, hardware accessories (bolts, nuts, washers, etc.), sealing strips, etc.

Check the electric rolling shutter door and accessories

Before installation, carefully check whether all components of the electric rolling shutter door are intact, whether the motor is running normally, whether the guide rail is straight, and whether the sealing strip is complete.

2. Install the guide rail

Fixed rail bracket

Install guide rail brackets on the walls on both sides of the door opening according to the size of the door opening and installation requirements. Use a spirit level to ensure that the bracket is installed horizontally, and then use expansion bolts to securely fix the bracket to the wall.

Install the guide rail

Insert the guide rail into the guide rail bracket, adjust the perpendicularity and levelness of the guide rail, and ensure that the guide rail is firmly installed and straight. Use bolts to secure the guide rail and bracket together.

3. Install the scroll

Determine the installation position of the scroll

Determine the installation position of the scroll based on the height of the door opening and the size of the electric rolling shutter door. Generally, the scroll is installed on the steel structural beam above the door opening.

Install the scroll bracket

Install the scroll bracket at the determined installation position of the scroll. Use a spirit level to ensure that the bracket is installed horizontally, and then use bolts to securely fix the bracket to the steel structural beam.

Install the scroll

Insert the reel into the reel support, adjust the levelness and perpendicularity of the reel, and ensure that the reel is firmly installed and rotates flexibly. Use bolts to secure the reel and bracket together.

4. Install electric rolling shutter door

Connecting door panels

Connect the door panels of the electric rolling shutter door together in sequence and fix them using specialized connecting pieces and bolts. Ensure that the door panel is securely connected without any looseness.

Install the door panel onto the guide rail

Insert the connected door panel into the guide rail to ensure smooth sliding of the door panel in the guide rail. Adjust the position of the door panel to align with the door opening.

Connect the motor and the reel

Install the motor at one end of the reel and connect it to the reel using a coupling. Ensure that the motor and reel are securely connected and rotate flexibly.

5. Install controller and debug

Install controller

According to the installation manual, install the controller in a suitable location, usually in a warehouse that is easy to operate. Connect the controller to the motor and ensure that the wiring is properly connected.

Debugging electric rolling shutter door

Connect the power supply and debug the electric rolling shutter door. Test whether the functions of the door, such as rising, falling, and stopping, are normal, adjust the limit switch of the door, and ensure that the door can accurately stop when opened and closed.

Check the sealing performance

Close the electric rolling shutter door and check the sealing between the door and the door opening. If there are gaps, use sealing strips for sealing treatment to ensure the sealing of the warehouse.

6. Cleaning and maintenance after installation

Clean up the installation site

After installation, clean up the garbage and debris on the installation site and keep the warehouse clean.

Regular maintenance

Regularly maintain the electric rolling shutter door, check whether the motor, guide rail, door panel and other components are operating normally, and repair or replace them in a timely manner if there are any problems. At the same time, regularly clean the door panels and guide rails to maintain the cleanliness and aesthetics of the door.