Five parts of steel structure factory workshop construction

The construction of steel structure factory buildings is mainly divided into the following five parts:

1. Embedded parts: it can stabilize the structure of the factory building.

2. Column: H-beam or C-shaped steel is generally used, and two C-shaped steels are usually connected by angle iron.

3. Beam: C-shaped steel and H-beam are generally used, and the height of the middle area is determined according to the span of the beam.

4. Steel purlins: C-shaped steel and Z-shaped steel are generally used.

5. Support points and tie rods are generally round steel.

6. Tile: There are two types, the first is sheet tile (color steel roof). The second type is the sandwich panel. The double-layer color-coated board is sandwiched with polyurethane material or rock wool board, which has the effect of warming in winter and cooling in summer, and also has the effect of sound insulation and fire prevention.