Installation method of workshop steel structure

The steel structure is to use steel as the material of the building structure, and the workshop steel structure is a type of building steel structure. The steel structure is composed of beams, columns, rigid platform columns and guardrails. During the construction process, the column should be installed first, then the beam, then the platform, and finally the guardrail. The installation of the steel structure of the factory building No matter what kind of equipment is installed, the first step is to set out the wires. Here I will talk about the installation method of the workshop steel structure.

1. Steel structure column installation

There are adjustable and non-adjustable steel structure columns, and different structures are used differently in different places.

2.Steel structure beam installation

It is supported by the top of the column for easy installation. The connection between the beam and the top of the column is generally fixed by welding or splint, which has the advantages of detachability and good stability.

3. Steel structure stringer installation

There are two types of plug-in beam installation: direct welding and bolt connection. During installation, the longitudinal beam and the steel platform are continuously installed from one side to the other.

4. Steel structure platform installation

There are two types of steel structure platforms: modular and integral. The installation method of the modular steel platform is to install it directly on the steel structure or in the middle of the beam after the installation of the beam and longitudinal beam is completed. The integral type is a direct connection between the steel structure beam and the platform and the overall installation.

5. Installation of steel structure stairs and guardrails

There are two kinds of inclined ladders or straight ladders. Generally, inclined ladders are heavier and straight ladders are lighter. During installation, a chain hoist can be hung above the platform, and the ladder is perpendicular to the platform and placed on the ground below the corresponding platform installation position. . The lower end of the hoist is tied to the upper part of the ladder and pulled upwards. After being pulled to the installation position, the position is adjusted. The upper part is welded to the platform beam, and the lower part is fixed with expansion bolts.

The above is the installation method of the steel structure of the factory building. The most important thing is to ensure the quality of the construction and avoid unnecessary troubles in the later stage.