Measures to prevent deviation during installation of steel warehouse building structure

If we make some mistakes in the installation of the steel warehouse building structure, it will cause the installation effect to not meet the expectations we want. At this point we can take some measures to remedy. Below, the steel structure manufacturer of Mosglong warehouse will share with you the measures to prevent the deviation of steel structure installation.

Measures to prevent deviation during installation of warehouse steel structure

1. The steel warehouse building structure should be checked and measured randomly when entering the site, and the deformation out of tolerance should be corrected and dealt with in time, and the installation can be started only after it is qualified.

2. Check and calibrate whether the measuring instrument is in good condition and whether the measurement and verification are expired to ensure the accuracy of the measuring instrument.

3. The compression deformation value of the steel structure and the shrinkage deformation value of the joint weld should be considered in the manufacturing process of the warehouse steel structure. During the construction process, welding shrinkage and deformation should be strictly controlled, and attention should be paid to the change of foundation settlement.

4. Select an appropriate time for measurement to ensure measurement accuracy.

5. After the steel structure is installed, reliable temporary fixing measures should be taken or stable units should be formed to ensure the safety of the warehouse steel structure.

6. For the steel warehouse building structure whose installation deviation exceeds the allowable deviation, it should be adjusted in time. Measurements shall be recorded for out-of-tolerance steel structures that cannot be adjusted. With the approval of the design and the relevant unit, the visa shall be received for filing.