Customized sale of steel structure shed building

How much is the cost of the steel structure shed? The price of steel structure shed is estimated according to the customized requirements. If you want the steel shed building to play an excellent role in practical operation, you need to design a steel structure shed building that meets your own needs. And then it should be installed according to the correct process.

Installation of customized steel structure shed building

The key points of steel component equipment include: Measurement and positioning, welding quality, component equipment elevation and plane orientation control, product inspection of steel components, etc.

Welding quality: special attention shall be paid to the steel structure welding. According to the manufacturing process requirements, the welding shortening allowance shall be reserved and the anti deformation shall be preset. When welding on the same member, the method of heat dispersion and symmetrical distribution shall be adopted as far as possible. In case of large deformation of components after welding, it shall be corrected by flame.

Measurement and positioning: the support elevation, axis positioning, axis and elevation of embedded bolts on the concrete structure, component equipment elevation and plane orientation shall be checked.

Precautions for on-site installation of steel shed:

The key point of the tensioning membrane equipment is to complete the collaborative operation of the tensioning membrane and the steel structure support system. The tension membrane is tensioned under the effect of the tension of the supporting structure and its own gravity to form a curved surface. Therefore, the connection between the membrane material and the supporting framework of the steel structure has become the key content of the equipment.

• 1. the joints between tensioning membranes shall be set on the steel structure support framework and fixed with clamps.
• 2. when the tension membrane is connected with the rigid edge member, the clamp shall continuously and reliably clamp the edge of the membrane material, and a gasket shall be set between the clamp and the tension membrane. When the rigid edge member has edges and corners, the center must be chamfered first to make the membrane material transition smoothly, so as to avoid scratching the membrane material and affecting its durability. The connection methods of tension membrane with concrete edge members and steel structure edge members are different.
• 3. before hoisting membrane structure unit, the accurate orientation of membrane structure unit shall be determined. Temporary splints shall be used when opening and hoisting membrane structure units. Hoisting shall be carried out in strict accordance with the construction scheme to avoid tearing of tensile membrane material due to excessive stress on the hoisting point.
• 4. the equipment of membrane structure unit shall be continuous. When the equipment operation cannot be completed continuously at one time, reliable temporary fixing method shall be adopted to resist the strong wind that may occur during the construction. At the same time, it shall be noted that there is no water on the membrane surface.
• 5. the operating environment for safe hoisting of membrane structure units shall be strictly controlled. The following points shall be met together: the wind force is less than grade III, and the temperature is higher than 4 ℃; Protective methods have been adopted for objects that may damage the tension membrane on site; The objects that may contaminate the tensioning membrane on site have been removed.